Produkttyp: visuReal Master

As of version 1.6.2, the software contains a slider with which you can decide yourself whether measurements that have not yet been completed are automatically

As of version 1.6.2, the system automatically determines how much free memory is available for measurements on the visuReal Master. You as the operator can

Measurements store only 72 hoursIf the 6-month storage time is activated, this switch can be used to undo it and reset it to 72 hours.

Yes, via the admin mode and the corresponding reset password IMPORTANT: Resetting the visuReal Master should only be done by an authorized visuSolution employee, admin

Once the admin has forgotten his password, he can no longer log in. However, he can reset the admin mode to factory default and set

Please note that the Admin. mode is only available from version 1.6.2. To activate it, call the admin login page via the IP address and

Switch: Service via VPN Switch: Automatic info about available updates connect the visuReal MASTER to a WLAN network or disconnect the connection By default, these

The default password to log in is: admin

Make sure that nothing is reflected in the visuReal Master mirror that could be mistaken for the person being measured during the exposure. Make sure

Check whether: the lighting conditions are OK. I.e. the customer is too little or too much illuminated. the measuring distance is correct. Recommended measuring distance